1.The world’s leading manufacturer of Xanthan gum,Oil Driling Chemicals etc.
2.Handle about 200,000 tons of chemicals,doing over 20,000 deliveries with a turnover of about 25,000,000 USD.
3.We start the bussiness since the year 1997.

Rubber & Plastic additives

Homogenizing agent AU-60NS FLAKES

Homogenizing agent AU-60NS FLAKES
Homogenizing agents



Homogenizingagent AU-60NS FLAKES

(Struktol 60NS FLAKES equivalent)

Composition: Mixture of Mixture of light-colored aliphatic hydrocarbon resins.





amber-colored pastilles

Softening point, ℃


Specific gravity





Application and characteristics:

AURORA homogenizing agents improve the homogeneity of elastomers of different polarity and viscosity. They are rapidly absorbed by the polymers during the mixing cycle. A relatively low viscosity mass is quickly achieved into which other compounding ingredients can easily be incorporated. The homogenizing agents are particularly effective with those elastomer blends, which tend to crumble at the beginning of the mixing cycle. The softening viscous resins wet the surface of the crumbs promoting the formation of a compact mass.

The reduction of compound viscosity and "nerve" achieved with AURORA homogenizing agents assist further processing. For instance, bagging tendency can be reduced, extrusion rates are increased without increasing the die swell, and calendering properties are improved. These benefits are retained even after long storage periods of the green compounds.

AURORA homogenizing agents increase the green tack of many compounds although strictly they are not tackifiers. They do, however, boost the efficiency of other tackifying agents.

AURORA homogenizing agents do not harden during vulcanization. The hardness of the vulcanizate is not reduced as much as when using, for example, mineral oil plasticizers.

AURORA 60 NS FLAKES is a mixture of light-colored aliphatic hydrocarbon resin.It is designed for light-colored compounds where non-staining is specified.  Its action is comparable with that of AURORA 40 MS FLAKES.This product has proven its value, particularly in compounds based on NBR/EPDM blends.

In most cases, the homogenizing agents are added to the polymers within the mixing cycle.AURORA 40 MS Flakes and AURORA 60 NS Flakes have good solubility in aromatic and chlorinated hydrocarbons.


4 - 15 phr

Package and storage: 
25kgs/bag or as customer’s request;

Stock it well-ventilation dry area below 35℃.Care must be taken not to double stack since the additional pressure will cause storage stability problems. In addition, as with all resins, the material should be used on a first-in, first-out basis.

Shelf Life: 2 years from the date of manufacture if stored as indicated above.

Links:Sodium polyacrylate Laboratory Refrigerator,Small Upright Freezer,Xanthan Gum Demulsifier